Acer S1370WHn User Manual - Page 50
To Change the Lamp, Pull out the lamp module by force. Illustration #7
View all Acer S1370WHn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
English 40 To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Open the screw cover on the right side of the projector. (Illustration #1) 5 Remove the screw on the right side of the projector. (Illustration #2) 6 Push and slide the top cover (Illustration #3) and then open the top cover.(Illustration #4) 7 Remove the two screws that secure the lamp module (Illustration #5) and pull up the lamp bar.(Illustration #6) 8 Pull out the lamp module by force. (Illustration #7) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.