Acer S191WL User Manual - Page 17
Installation
View all Acer S191WL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2 Connect Digital Cable (Only Dual-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. 2. Connect the adapter a. Connect the AC cord to the adapter. b. Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet. 3. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 4. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. DC D-Sub DVI DC IN DVI D-Sub EN-8