Acer SpatialLabs Nitro ASV15-1B User Manual - Page 16

Package contents, Adjusting the display base, Connecting the power cord, Charging the device

Get Acer SpatialLabs Nitro ASV15-1B PDF manuals and user guides View all Acer SpatialLabs Nitro ASV15-1B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Package contents LCD Display Quick Start Adaptor Device Guide USB A to HDMI Cable USB-C Cable Adjusting the display base 1. Carefully remove the display from its packaging. • The display base is attached onto the display before shipment and it is not detachable. 2. Pull the display base out fully so that the display can be placed on a stable surface in the upright position. Connecting the power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The display has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet. • For units using: Use a UL-listed cord set, type SVT wire and plug rated 7A/125 V. Charging the device • Only use the power adaptor for the battery charging. • Your device uses the following power suppliers: ◼ Manufacturer: Delta Electronics inc. ◼ Model no: ADP-14EF F • • The product is not allowed for power to be delivered via USB-C cables.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Package contents
LCD Display
Device
Quick Start
Guide
Adaptor
USB A to
USB
-
C Cable
HDMI Cable
Adjusting the display base
1.
Carefully remove the display from its packaging.
• The display base is attached onto the display before shipment and it is not
detachable.
2.
Pull the display base out fully so that the display can be placed on a stable
surface in the upright position.
Connecting the power cord
•
Check first to make sure that the power cord you use is the correct type required
for your area.
•
The display has a universal power supply that allows operation in either 100/120
V AC or 220/240 V AC voltage area. No user
-
adjustment is required.
•
Plug one end of the power cord to the AC inlet, and plug the other end into an AC
outlet.
•
For units using: Use a UL
-
listed cord set, type SVT wire and plug rated 7A/125 V.
Charging the device
•
Only use the power adaptor for the battery charging.
•
Your device uses the following power suppliers:
◼
Manufacturer: Delta Electronics inc.
◼
Model no: ADP
-
14EF F
•
•
The product is not allowed for power to be delivered via USB
-
C cables.