Acer T230H Acer T230H LCD Monitor User's Manual - Page 15

INSTALLATION To install the monitor to your host system, please follow the steps as given below: T230H Steps Make sure both the monitor and computer are powered-OFF. 1. 1-1 Connect Video Cable Connect the VGA video cable to the computer. 1-2 Connect Digital Cable . Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. 1-3 Connect HDMI Cable . Connect the HDMI cable to the computer. 1-4 Connect Audio Cable . Connect the Audio cable to the computer. 1-5 Connect USB Cable Connect the USB cable to the computer. 2. Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 4. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. EN- 14