Acer T232HL User Manual - Page 13
Installation - usb fast charge
View all Acer T232HL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 1-2 1-3 2. 2-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Connect Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. Connect HDMI Cable (Only HDMI-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. Connect the USB Cable(Optional) 2-2 Connect the USB 3.0 cable to port for fast charge. 2-3 Connect the USB 3.0 cable to port. 3.Connect the Audio Cable(Only Audio-Input Model)(Optional) 4. Connect power adapter and power cord Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet. 5. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 6. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. 2-2 USB3.0 port -supporting fast charge 2-3 USB3.0 port DVI VGA HDMI USB 2-1 1-1 1-2 1-3 3 VGA DVI USB HDMI 4 43 1-3 1-2 1-1 2-1 EN-12 2-3 2-2