Acer T272HUL User Manual - Page 13

INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. 1-2 Connect HDMI Cable (Only HDMI-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. 1-3 Connect DP Cable (Only DP -Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DP cable to the computer. 2. 2-1 Connect the USB Cable(Optional) 2-2 Connect the USB 3.0 cable to port for fast charge. 2-3 Connect the USB 3.0 cable to port. 3.Connect the Audio Cable(Only Audio-Input Model)(Optional) 4. Connect power adapter and power cord Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet. 5. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 6. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. 2-2 USB3.0 port -supporting fast charge 2-3 USB3.0 port DVI DP HDMI USB 2-1 3 1-1 1-2 DVI USB HDMI 1-3 DP 4 4 3 1-31-21-1 2-1 EN-12 2-3 2-2