Acer TravelMate 2350 TravelMate 2350 Service Guide - Page 38

Advanced The Advanced screen contains parameters involving your hardware devices. It also provides advanced settings of the system. Insyde Software SCU Main Advanced Infrared Port (FIR) Parallel Port (LPT) £ Legacy USB Support Security May 20, 2003 5:40:09 AM Boot Exit FIR Ports -----FIR I/O settings--- -Mode Setting for IRDA- ( ) Disabled ( ) COM1,3F8,IRQ4 ( ) Normal (16550) ( ) IrDA (HPSIR) (£») COM2,2F8,IRQ3 ( ) ASK IR ( ) COM3,3E8,IRQ4 (£») FAST IR ( ) COM4,2E8,IRQ3 DMA Setting For FIR ( ) DMA1 ( ) DMA2 (£») DMA3 OK Cancel froblock select. for item select. < Enter> for accept. for reject. activates accelerators. for Enable or Disable. The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings. FIR I/O Settings DMA Setting for Fast IR Mode Setting Description Sets the base I/O address and IRQ for Infrared port. Sets a DMA channel for the printer to operate in ECP mode. This parameter is enabled only if Mode is set to ECP. NA Option Disabled, COM1, 3F8, IRQ4/ COM2, 2F8, IRQ3/ COM3, 3E8, IRQ4/ COM4, 2E8, IRQ3 DMA1, DMA2, DMA3, Normal (16550), IrDA (HPSIR), ASK IR, FAST IR 32 Chapter 2