Acer TravelMate 2410 TravelMate 2410 Service Guide - Page 35

Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer's BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when "Press to enter Setup" message is prompted on the bottom of screen). Press m to enter setup. The default parameter of F12 Boot Menu is set to "disabled". If you want to change boot device without entering BIOS Setup Utility, please set the parameter to "enabled". Press during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility. Information Main PhoenixBIOS Setup Utility Security Boot Exit CPU Type : CPU Speed : IDE1 Model Name : IDE1 Serial Number : IDE2 Model Name : IDE2 Serial Number : System BIOS Ver: VGA BIOS Ver KBC Ver Serial Number Asset Tag Number Produce Name Manufacturer Name: UUID: Intel (R) Pentium (R) M processor 1.86GHz 1866MHz TOSHIBA MK8025GAS - (PM) None PIONEER DVD-RW DVR-K15RA - (PS) None V0.06A 1277 07.07 xxxxxxxxxxxxxxxxxxxxxx N/A TravelMate 2410 Acer xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 22 Byte 32 Byte 16 Byte 16 Byte 32 Byte F1 Help Esc Exit ↑ ↓ Select Item ← → Select Menu F5/F6 Change Values Enter Select 4 Sub- Menu F9 Setup Defaults F10 Save and Exit Chapter 2 29