Acer TravelMate 5610 Aspire 9410 - 7110 and TravelMate 5610 - 5110 Service Gui - Page 66

General Information Before You Begin Before proceeding with the disassembly procedure, you have to make sure that: 1. The system and all peripherals are powered off. 2. The AC adaptor and all power and signal cables from the system are unplugged. 3. The battery pack is removed. NOTE: There are several types of screws used to secure the main unit. The screws vary in length. Please refer to the screws table after the flowchart. Group the same type of screws together during service disassembling. Please also remember the screw location for each screw type. If you fasten the screws on the wrong location, the long screws may cause irrecoverable damage to the main board. 57 Chapter 3