Acer TravelMate 6492 Service Guide - Page 60

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Extended Memory Video Memory Quiet Boot Network Boot F12 Boot Menu D2D Recovery Description Format/Option Sets the system time. The hours are displayed with 24-hour format Format: HH:MM:SS (hour:minute:second) Sets the system date Format MM/DD/YYYY (month/day/year) This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the memory size of the extended memory in the system (Extended Memory size=Total memory size-1MB) Shows the VGA memory size Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled Enabled: Customer Logo is displayed, and Summary Screen is disabled Disabled: Customer Logo is not displayed, and Summary Screen is enabled Option: Enabled or Disabled Enables or disables the system boot from Option: Enabled or Disabled LAN (remote server) Enables or disables Boot Menu during POST. Enabled: During quite boot, the OEM POST screen displays Press Change Boot Device Disabled: During quite boot, the OEM POST screen does not display Press Change Boot Device Note: This Boot device change is applies to next boot only. Option: Disabled or Enabled Enables or disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults Option: Enabled or Disabled Note: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. 50 Chapter 2