Acer TravelMate 8473 Acer TravelMate 6495T, TG and 8743, T, TG Service Guide - Page 75

Machine Maintenance Machine Disassembly and Replacement 0 This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Cable paths and positioning may not represent the actual model. During the removal and installation of the components, ensure all available cable channels and clips are used and that the cables are replaced in the same position. The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components. The product previews seen in the disassembly procedures may not represent the final product color or configuration. Recommended Equipment 0 To disassemble the computer, the following tools are suggested: Wrist grounding strap and conductive mat for preventing electrostatic discharge Non-marring scribe Phillips screwdriver Flat-blade screwdriver Plastic flat screwdriver Plastic tweezers Cyanoacrylate glue Replacement Requirements 0 NOTE: NOTE: Cabling and components require adhesive to be applied during the replacement and reassembly process. Machine Maintenance 3-5