Acer TravelMate 8481 User Guide - Page 44
Recovering from the hard drive during startup, Recovering from your recovery backup
View all Acer TravelMate 8481 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
English 24 Recovering from the hard drive during startup To reinstall Windows and all pre-installed software and drivers: 1 Turn on your computer, then press + during startup to open Acer eRecovery Management. 2 Click Restore Operating System to Factory Defaults. Warning: Continuing the process will erase all files on your hard drive. 3 Click Next. Your hard drive's original, factory-loaded contents will be recovered. This process will take several minutes. Recovering from your recovery backup To reinstall Windows and all pre-installed software and drivers: 1 Plug in the USB flash drive and turn on your computer. Warning: Continuing the process will erase all files on your hard drive. If it is not already enabled, you must enable the F12 Boot Menu: Press when starting your computer. Use the left or right arrow keys to select the Main menu. Press the down key until F12 Boot Menu is selected, press to change this setting to Enabled. Use the left or right arrow keys to select the Exit menu. Select Save Changes and Exit and press Enter. Select OK to confirm. Your computer will restart. 2 During startup, press to open the boot menu. The boot menu allows you to select which device to start from, such as a flash drive. 3 Use your arrow keys to select the line USB HDD, then press . Windows will install from the recovery backup on the USB flash drive. 4 Follow the onscreen prompts to complete the recovery.