Acer TravelMate C210 TravelMate C210 Service Guide - Page 52

Main The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters. NOTE: The screen above is for reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Extended Memory VGA Memory Quiet Boot Power on display LCD Auto Dim PXE (Preboot Execution Environment) Boot From LAN F12 Boot Menu Description Format/Option Sets the system time. Format: HH:MM:SS (hour:minute:second) System Time Sets the system date. Format MM/DD/YYYY (month/day/ year) System Date This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB Shows the VGA memory size. The default value is set to 8MB. Note: 8MB is VGA memory size under DOS mode. Dynamic video memory allocation up to 64MB in Windows mode. Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Option: Enabled or Disabled Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Both: Simultaneously enable both the integrated LCD screen and the system's external video port (for an external CRT or projector). Option: Auto or Both Determines if the system will automatically dim Option: Enabled or Disabled the LCD brightness in order to save power when AC is not present. Indicates that whether the notebook can boot from LAN or not. Option: Enabled or Disabled Determines if the OEM POST screen will have Option: Enabled or Disabled "Press Change Boot Device" or not during user's quite boot. NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. 44 Chapter 2