Acer TravelMate C300 TravelMate C300 Service Guide - Page 62

Disassembling the Main Unit, Separate the main unit into the logic upper and the logic lower assembly

Page 62 highlights

Disassembling the Main Unit Separate the main unit into the logic upper and the logic lower assembly 1. Disconnect the RTC battery then remove it. 2. Pop out the memory then remove it from the DIMM socket. 3. Remove the 14 screws holding the upper case assembly and the lower case assembly. 4. Remove the screw holding the upper case assembly and lower case assembly. 5. Disconnect touchpad cable connecting to the main board. 6. Separate the main unit into the upper case assembly and the lower case assembly. Disassembling the logic upper assembly 1. Disconnect the touchpad cable. 2. Tear off the touchpad cable. NOTE: The touchpad cable has been fastened very tight to the upper case by black tape. It is easy tear the touchpad cable when removing the black tape. 3. Release the touchpad cover latches. 4. Detach the touchpad holder. 54 Chapter 3

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.