Acer TravelMate Spin P4 Lifecycle Extension Guide - Page 25

3. Disconnect the P-sensor cable from the LTE board connector (E) (Figure 1-29). 4. Disconnect the fingerprint FFC from the LTE board connector (F) (Figure 1-29) 5. Disconnect the stylus charger cable from the LTE board connector (G) (Figure 1-29). 6. Disconnect the DB FFC from the LTE board connector (H) (Figure 1-29). 7. Remove two (2) screws (I) securing the LTE board (Figure 1-29). I F E H G Figure 1-29. LTE Board Removal ! CAUTION: Fingerprint FFC (Flexible Flat Circuit) and DB FFC can be damaged if removed while the LTE board connectors are locked. 8. Release the LTE board (J) from the I/O connectors slots and guide pins (K) on the top assembly (Figure 1-30). Then remove the LTE board. WEEE Annex VII Component: LTE Board K K J Figure 1-30. LTE Board Removal Disassembly Procedures 1-23