Acer TravelMate Spin P6 Lifecycle Extension Guide - Page 20
USB Board Removal, Disconnect the stylus charger cable from the USB board connector D
![]() |
View all Acer TravelMate Spin P6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Lift the right LCD hinge upwards until it is fully open (Figure 1-21). Figure 1-21. USB Board Removal 4. Disconnect the USB board FFC from the USB board connector (A) and mainboard connector (B) (Figure 1-22). 5. Disconnect the fingerprint board FFC from the USB board connector (C) (Figure 1-22). 6. Disconnect the stylus charger cable from the USB board connector (D) (Figure 1-22). 7. Remove two (2) screws securing the USB board in place (Figure 1-22). A B D C Figure 1-22. USB Board Removal 1-18 Disassembly Procedures
![](/manual_guide/products/acer-computers-travelmate-spin-p6-lifecycle-extension-guide-9c63167/20.png)
1-18
Disassembly Procedures
3.
Lift the right LCD hinge upwards until it is fully open (
Figure 1-21
).
Figure 1-21.
USB Board Removal
4.
Disconnect the USB board FFC from the USB board connector (A) and mainboard
connector (B) (
Figure 1-22
).
5.
Disconnect the fingerprint board FFC from the USB board connector (C) (
Figure 1-22
).
6.
Disconnect the stylus charger cable from the USB board connector (D) (
Figure 1-22
).
7.
Remove two (2) screws securing the USB board in place (
Figure 1-22
).
Figure 1-22.
USB Board Removal
A
B
C
D