Acer UT241Y User Manual - Page 26
Product information, DDC/CI, short for Display Data Channel/Command Interface, which allows
View all Acer UT241Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1. Press the Menu hot key to open the OSD. 2. Using the ▲/▼ keys, select System from the OSD. Then navigate to the picture element you wish to adjust. 3. Use the ◄/► keys to select the setting. 4. Input: Select the source from VGA IN, HDMI, or DP ALT. 5. Wide mode: You can select which screen aspect you are using. The options are Full, Aspect . 6. Hotkey Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive Note: Hot Key 1 and Hot Key 2 can't repeat the same function. 7. DDC/CI: Allows the monitor settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. 8. HDMI Black level setting: Select to set HDMI black level. 9. Quick start mode: Select Off or On. Turn on to speed up boot speed. 10. Power-off USB charge: Turn On or Off. Product information Mode - Standard Picture Color Audio Pertormance OSD System Information Main Source HDMI Resolution 1920x1080 H/V Frequency H: 66 KHz V: 60 Hz Serial Number: MN53035032682018TPV888 Reset All Settings Reset All Settings 1. Press the Menu hot key to open the OSD. 2. Using the ▲/▼ keys, select Information to view the basic information for your monitor and current input, resolution and series number. 3. Reset all settings: Reset the custom color settings to factory defaults.