Acer V6820M User Manual - Page 38
from Grid Green, Grid Magenta, Grid White, White., Off: Default is Off.
View all Acer V6820M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
English 28 Power Management AC Power On Choose "On" to power on projector while AC power plug in. Auto Shutdown (Minutes) The projector will automatically shutdown when there is no signal input after the allocated time. (default is 20 minutes) Sleep Time (Minutes) Sets the sleep timer. Network Standby • Off: Default is "Off". • LAN: Choose "LAN" to enable LAN control under standby mode. • WiFi: Choose "WiFi" to enable WiFi control under standby mode. Test Pattern Default is "Off" to disable this function or select the test pattern from Grid (Green), Grid (Magenta), Grid (White), White. Projection • Front: The factory default setting. • Rear: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. • Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. HDMI EDID Select the HDMI EDID type from 2.0 or 1.4 Source Selection Select source detection information from Notification, Manual or Auto. High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Screen Default is "Off" , the down/up move of electronic screen will be related with power on/off of Projector. Note: Functions vary depending on model definition.