Acer VA241Y User Manual - Page 23

Installation

Page 23 highlights

English Installation  To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (only for dual-input models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computer's port. d Connect HDMI cable (only for HDMI-input model)(Optional). (1) Make sure both the monitor and computer are powered-OFF. (2) Connect the HDMI cable to computer. 2 Connect the power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. VGA VGA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

English
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
3
4
a
Make sure both the monitor and computer are switched off.
b
Connect the VGA video cable to the computer.
c
Connect the digital cable (only for dual-input models).
(1)
Make sure both the monitor and computer are switched off.
(2)
Connect one end of the 24-pin DVI cable to the back of the
monitor and the other end to the computer's port.
(1)
(2)
d
Connect the HDMI cable to computer.
Make sure both the monitor and computer are powered-OFF.
Connect HDMI cable (only for HDMI-input model)(Optional).
VGA
VGA