Acer VG270U User Manual VG270U P - Page 26
VRB does not support PIP/PBP Mode and HDR Mode. Selective
View all Acer VG270U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Adjusting the Gaming 1. Press the MENU key to open the OSD. 2. Using the Navi/OK button, select Gaming from the OSD. Then navigate to the setting you wish to adjust. 3. Use the Navi/OK button to adjust any sliding scales. 4. Over Drive: Select Off, Normal, or Extreme. Note: 1. If FreeSync is "ON", then the Over Drive selection is set to "Normal" automatically 2. If FreeSync is "OFF", then the user can set Over Drive to either one of the three settings including: (a) Extreme (b) Normal (c) Off 5. FreeSync: Select On or Off. FreeSync is available for AMD supported graphic cards only. 6. VRB: When VRB is Extreme or Normal, VRB provides a sharper and clearer dynamic picture; the default is Off. • VRB does not support PIP/PBP Mode and HDR Mode. (Selective models) • When VRB is Extreme or Normal, FreeSync is automatically turned off. • VRB will affect the brightness of the following: Logo, Aim Point, Message and Input Icon. • VRB feature is dependent on the monitor's maximum refresh rate. For monitors supporting up to 144 Hz, VRB is available when the refresh rate is set to 85, 100, or 120 Hz. 7. Aim Point: Show an Aim point on the screen for shooting games. EN-16