Acer Veriton 2800 Veriton 2800 Service Guide - Page 81

Connectors Chassis Intrusion Switch Connector: This connector is connected to a 2-pin chassis switch. If the chassis is opened, the switch will be short. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record. CINTRU 1 GND 2 JCI1 Serial ATA Connectors: Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly. Illustration Pin No. 1 2 3 4 5 6 7 GND TXP TXN GND RXN RXP GND Definition Front Panel Connectors: F_PANEL Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below. 73 Chapter 5