Acer Veriton 5200 Veriton 5200 Service Guide - Page 34

Standard CMOS Features Select "Standard CMOS Features" from the main menu to configure the drives installed in your system. The following screen shows the Disk Drives menu: The following table describes the parameters found in this menu. Date Parameter Time IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary Slave Drive A Description Options Lets you set the date following the weekday-month-day- Weekday: Sun, Mon....Sat year format Month: Jan, Feb...Dec Day: 1 to 31 Year: 1980 to 2079 Lets you set the time following the hour-minute-second format Hour: 0 to 23 Minute: 0 to 59 Second: 0 to 59 Lets you configure the hard disk drive connected to the master port of IDE channel 1. To enter the IDE Primary Master setup, press Enter. The IDE CD-ROM is always automatically detected. IDE Device Model Number None Lets you configure the hard disk drive connected to the slave port of IDE channel 1. To enter the IDE Primary Slave setup, press Enter. The IDE CD-ROM is always automatically detected. IDE Device Model Number None Lets you configure the hard disk drive connected to the master port of IDE channel 2. To enter the IDE Secondary Master setup, press Enter. The IDE CD-ROM is always automatically detected. IDE Device Model Number None Lets you configure the hard disk drive connected to the slave port of IDE channel 2. To enter the IDE Secondary Slave setup, press Enter . The IDE CD-ROM is always automatically detected. IDE Device Model Number None Allows you to configure your floppy drive A. 1.44 MB, 3.5-inch None 360 KB, 5.25-inch 1.2 MB, 5.25-inch 720 KB, 3.5-inch 2.88 MB, 3.5-inch 25 Chapter 2