Home » Acer Manuals » Desktops » Acer Veriton N2110G » Manual Viewer

Acer Veriton N2110G Acer Veriton N2110G Desktop Service Guide - Page 16

Advanced, Parameter, Description, Option, Disabled, Enabled, Always Off

View all Acer Veriton N2110G manuals

Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Advanced Parameter Onboard LAN PXE Boot Wake up on LAN EUP Function AC Power Recovery Resume on RTC Description Enable or Disable Boot Option for Legacy Network Devices. Turning this feature on will wake the system up when the internal LAN device receives a Magic Packet in Power-Off state. Enable/Disable EUP Function. Specifies behaviour on AC power recovery after AC power is disconnected and then plugged in. Enable/Disable RTC Function. Note: The RTC function will not work in S5 when EUP function is enabled. Option Enabled Disabled Enabled Disabled Enabled Disabled On Always Off Enabled Disabled 8 Veriton N2110G Service Guide

Section	Page
Veriton N2100G ThinClient Computer Service Guide V1.00	1
Features and Specifications	9
System Features	9
Audio	9
I/O Ports and LED Indicators	10
Physical Specifications	10
Environmental Requirements	10
System Tour	11
Front View	11
Rear Panel	12
System Utilities	13
CMOS Setup Utility	13
Entering CMOS Setup	13
Navigating Through the Setup Utility	14
Setup Utility Menus	14
Info	15
Advanced	16
Boot	17
Security	18
Setting an system password	18
Changing the system password	18
Removing a system password	18
Exit	19
System Disassembly	21
Disassembly Requirements	21
Pre-disassembly Procedure	21
Disassembly Procedures	22
Removing the Computer Stand	22
Removing the Side Panel	23
Removing the Heatsink Assembly	24
Removing the Speaker Module	25
Removing the WLAN Module	26
Removing the SSD Module	28
Removing the Mainboard	29
Removing the Memory Modules	31
Removing the WLAN Antenna	32
Reassembly Procedures	34
Reinstalling the WLAN Antenna	34
Reinstalling the Memory Modules	36
Reinstalling the Mainboard	37
Reinstalling the SSD Module	39
Reinstalling the WLAN Module	40
Reinstalling the Speaker Module	41
Reinstalling the Heatsink Assembly	42
Reinstalling the Side Panel	43
Removing the Computer Stand	44
Troubleshooting	45
Hardware Diagnostic Procedure	45
System Check Procedures	45
Power System Check	45
System External Inspection	45
System Internal Inspection	46
Checkpoints	46
Viewing BIOS Checkpoints	46
UEFI BIOS POST Code Checkpoints	46
Status Codes	47
SEC Status Codes	47
PEI Status Codes	47
S3 Resume Progress Codes	48
Recovery Progress Codes	48
DXE Status Codes	48
CPU Exception Status Codes	50
ASL Status Codes	51
OEM-Reserved Status Codes	51
POST Error Indicators	52
POST Error Messages	52
SEC Error Codes	52
PEI Error Codes	52
S3 Resume Error Codes	53
Recovery Error Codes	53
DXE Error Codes	53
Beep Codes	54
PEI Beep Codes	54
DXE Beep Codes	54
Undetermined Problems	54
Clearing CMOS	55
BIOS Recovery	56
Creating the BIOS Crisis Recovery Disk	56
Performing a BIOS Recovery	56
System Architecture	57
Block Diagram	57
Mainboard Layout (top)	58
Mainboard Layout (bottom)	59
Jumper Setting	60
Field Replaceable Unit (FRU) List	61
Exploded Diagram	62
Veriton N2110G FRU List	63
Technical Specifications	67
Processor	67
System Board Major Chips	67
System Memory	68
System BIOS	68
Solid State Disk (SSD) Drive	68
Network Interface	69
SATA Interface	69

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.