Acer X1120 User Manual - Page 38
Security, TimeoutMin., User Password, When the time is up, the projector will prompt the user to enter
View all Acer X1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Security 29 Security This projector is equipped with a useful security function for the administrator to manage projector use. Press to change the Security setting. If the security function is enabled, your must enter the Administrator Password first before changing the security settings. • Select On to enable the security function. The user has to enter a password to operate the projector. Please refer to the User Password section for details. • If Off is selected, then the user can turn on the projector without password. Once the security function is enabled, the projector will request user to enter password when switch on the projector. Both User Password and Administrator Password can be used. Timeout(Min.) Once Security is activated, the administrator can set the timeout function. • Press or to select the timeout interval. • The range is from 10 minutes to 990 minutes. • When the time is up, the projector will prompt the user to enter the password again. • The factory default setting of Timeout(Min.) is Off. User Password • Press to set up or change the User Password. • Use the number keys to set your password on the remote control and press MENU to confirm. • Press to delete a character. • Enter the password again when you see Confirm Password displayed. • The password should be between four and eight characters long. • If you select Request password only after plugging power cord, the projector will prompt the user to enter the password every time the power cord is plugged in. • If you select Always request password while projector turns on, the user has to enter the password every time the projector is turned on. English English