Acer X1210 Quick Start Guide - Page 2
English - projector
View all Acer X1210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
English 繁體中文 Quick Start 快速啟用 1 INSTALLATION 1. Power cord 2. VGA cable 3. VGA to component video/HDTV adapter 4. Composite video cable 5. Audio cable 6. S-Video cable 7. RS232 cable 8. USB cable 9. 3 RCA component cable 1 安裝 1. 電源線 2. VGA 訊號線 3. VGA HDTV 轉接器 4 5 6. S-Video 連接線 7. RS232 連接線 8. USB 連接線 9. 3 向 RCA Note: Connector interface is subject to model's specifications 2 INTERFACE CONNECTOR 2 Connecting to a Computer 1. Ensure the projector and your computer are turned off. 2. Connect one end of the VGA cable to the "VGA IN" connector on the projector; connect the other end to the VGA connector on the computer and tighten the screws. 3. Connect one end of the power cord into the AC power socket on the projector; connect the other end to an electrical outlet. Powering On the Projector 1 2. 將 VGA 「VGA IN VGA 3 AC 1 2 3 4 1. Remove the lens cap. 2. Turn on the projector first and then the computer. 3. Adjust the position, focus and zoom. 4. Run your presentation. 1 AC Powering Off the Projector 1. Press the power button twice. 2. Do not remove AC power cord from outlet until the projector fans shut down.