Acer XB323QKNV User Manual - Page 29

English 5. Auto Source: The default is "On", which can support auto search for signal source in order Note: Surround application must set Auto Source is "Off". 6. Wide mode: You can select which screen aspect you are using. The options are Aspect, Full, 1:1 and 21:9. 7. Lighting: Ambient light, choose to follow a favorite to many functions. • Lighting Switch: Lighting main switch, default is "Enable". • Remote Lighting: Mandatory control lighting by remote. Note: The function sku by country. • Lighting Style: 9 kinds of style choice. Static (Default),Shifting, Filling, Breathing, Motion, Zoom ,Spectrum, Wave ,Starlight flashing. • Lighting Color: 6 kinds of manually select the lighting color. Blue (Default), Red, Green ,Yellow , Magenta , Cyan. • Lighting Brightness: Control lighting brightness value ,when choose "Auto" that LED brightness will depend on lightsense. • Lighting Health: When user select to Warm/ Normal/ Cool, LED brightness & LED color R, G, B value are adjustment by setting value. When user select to disable, Lighting will be return to previous lighting style. 8. Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive, VRB) and shortcut keys 2 (Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive, VRB). 9. DDC/CI: Allows the monitor settings to be set through the software on the PC Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. 10. ProxiSense: ProxiSense works on principle of transmission and reception of harmless "infrared" signals in order to detect user-presence Note: • The ProxiSense is set to (Range 1 to Range 3), tolerance is (+/-) 20 cm and ACM is off. • Three status (No signal, no cable connection and out of range) does not support ProxiSense. • The ProxiSense controls the PWM to 50% (current OSD Brightness parameter) or into the power saving state, and then press any key to restore the PWM to the normal value. • Power The detection range of the Sensor is in the middle, the upper and lower angles are ignored. 11. Rest Reminder: ProxiSense is set Range1~Range3 then Rest Reminder can be control (Off ~ 100Mins), Rest Reminder default is Off Note: • ProxiSense must be set to Range 1 and Range 3 before the Rest Reminder can be opened for selection (Off /20 Mins /40 Mins /60 Mins /80 Mins /100 Mins ), The default setting is Off to not remind.