Acer XR342CK User Manual - Page 25
DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
View all Acer XR342CK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English 2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales. 4. Input: Select the source from DP In, HDMI 2.0,HDMI(MHL),or miniDP. 5. Auto Source:The default is "On", can support auto search for signal source in order. 6. Daisy Chain: Default is extend, can select daisy chain function extend or clone. Clone Mode is not supported with Adaptive-Sync. 7. DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format. 8. Wide mode: You can select which screen aspect you are using. The options are Full, Aspect, and 1:1. 9. PIP/PBP settings 10. Ambient light: Adjust the lighting effects, color, and style. When choosing lighting effects by MNT Status, following colors will be shown: White: Normal mode. Red: Adaptive-Sync mode. 11. Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Input, Volume, Gamma, Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2 (Modes, Brightness, Input, Volume, Gamma, Contrast, Blue Light, Over Drive,PIP/PBP) 12. DDC/CI: Allows the monitor settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. 13. HDMI Black level setting. 14. Quick start mode: Select Off or On. Turn on to speed up boot speed. 15. Power-off USB charge: Turn On or Off. Save Setting to...(User mode only) Game Mode - User Picture Game Mode Action Color Game Mode Racting Audio Game Mode Sport Gaming OSD System X Save setting to... Move Enter 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.