Acer XV272UKF User Manual - Page 27

English • CIE 1931 positive and negative error of 0.05, ("HDR" according to current Panel to fine-tune). • Color Space = HDR, the Modes = HDR, Picture page HDR = Auto. • The signal content is SDR, the brightness can to adjustment, but content is HDR the brightness is fixed at 100 and gray out unavailable. • Modes = (Action/Racing/Sports/User/Standard/ECO/Graphics) is selected; the color space is auto set to "General". • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), If to adjust the parameter the Modes will not jump to User mode, but the Color Space = "General" except. • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), 6-Axis Hue & Saturate is gray out and unavailable. • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), Grayscale Mode is gray out and unavailable. • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), (Light & Color) Sensor are gray out and unavailable. 8. ColorSense: Automatically adjust color temperature smoothly Note:  • ColorSense is On, Factory Menu can check the CT (Color Temp) Value. • Mode = HDR, does not support the ColorSense. • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), does not support the ColorSense. • ColorSense is on, the Modes is User, the (Contrast, Color Temp, Low Blue Light, 6 axis Hue, 6 axis Saturate, Grayscale Mode) functions are gray out and unavailable. 9. Grayscale Mode:To choose Grayscale mode. 10. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue. 11. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation. 27