Acer XV273K User Manual - Page 32
Hotkey Assigment, DDC/CI, HDMI Black level, Quick start mode, LED Control, 4K-144Hz Mode
View all Acer XV273K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
• Hotkey Assigment: Select the function of shortcut key 1 or shortcut keys2:(Modes, Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,VRB Note: Hot Key 1 and Hot Key 2 can't repeat the same function. • DDC/CI: Allows the monitor settings to be set through the software on the PC Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. • HDMI Black level: Select to set HDMI black level. • Quick start mode: Select Off or On. Turn on to speed up boot speed. • LED Control: Controls the brightness of the Key LED. • 4K-144Hz Mode: Default is "Off" (Support DP Only). Off: Support 4K-120Hz (Support HDR and FreeSync). On: Support 4K-144Hz (Not Support HDR and FreeSync). Note: Want to support 4K-144Hz, Graphic Card must be able to support 4K-144Hz and both DP1 and DP2 must be connected at the same time to enable this feature. To support display 4K-144Hz. 1. Min requirement is AMD RX470 or above graphic card 2. To connect both DP1 + DP2 port, need to use in box DP cables or VESA certified DP cables. 3. Must to turn on the 4K-144Hz mode in system page of OSD. 21 XV273K User Guide English