Acer XZ350CU Quick Guide - Page 2

English Acer LCD Monitor Quick Start Guide (QSG) Important safety instructions Please read the following instructions carefully. 1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location. • Turn off the LCD monitor and unplug the power cord. • Spray a non-solvent cleaning solution onto a rag and clean the screen gently. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. • PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE. • Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. 2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature. 5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the LCD monitor outside this range may result in permanent damage. 6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur: • Monitor-to-PC signal cable is frayed or damaged. • Liquid spills onto the LCD monitor or the monitor is exposed to rain. • The LCD monitor or case is damaged. Attaching the monitor to the base 1. Remove the monitor base from the packaging and place it on a stable and level workspace. 2. Remove the monitor from the packaging. 3. Attach the monitor stand arm to the base. • Ensure that the base is locked onto the monitor stand arm. (for selected models) • Secure the base to the monitor stand arm by turning the screw using the integrated tab or a suitable coin. (for selected models) Connecting Your Monitor to a Computer 1. Turn off your monitor and unplug your computer's power cord. 2. 2-1 Connect HDMI Cable (Only HDMI-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. Or connect the MHL cable (Only for MHL-Input Model)(Optional) to the portable device. 2-2 Connect DP Cable (Only DP-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DP cable to the computer. 3. Connect the Audio Cable. (Optional) 4. Insert the monitor power cable into the power port at the back of the monitor. 5. Plug the power cords of your computer and your monitor into a nearby electrical outlet. 6. Select Power-off USB charge ON/OFF to enable/disable Power-off USB charge function. DC DP HDMI HDMI 1(MHL) HDMI 2 DP IN DP OUT External Controls No. Icon Item 1 Power button/ indicator 2 Input button Description Press to turn the monitor ON or OFF. Lights up to indicate the power is turned on. Press to toggle input sources. 3 Volume button Press to activate the volume sliding scale. 4 OSD menu button Press to activate the OSD menu. Press to activate the OD menu and set it to Off, 5 OD button Normal, or Extreme mode. If the OSD is active, press it to enter a selection. 6 Game Mode button Press to activate the Game Mode menu. 6 54 3 21