Adaptec 131CA Hardware Guide - Page 38
Close, Start, Control Panel, SCSI Adapters, Drivers, Have Disk, Continue
UPC - 760884130476
View all Adaptec 131CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
AAA-131CA Installation and Hardware Guide 11 Add other types of host adapters if necessary (see Step 4 above), or click Close to exit the SCSI adapters portion of Windows NT Setup, and then close the program. 12 When you see this message, click OK to exit: The changes you have made will not take effect until the computer is restarted If this message does not appear, no changes have been made to the Windows NT system configuration. 13 Restart your computer and Windows NT. Some drive letter assignments may change from the previous configuration. Windows NT 4.0 To install the cda1000.sys driver when Windows NT 4.0 is already installed, follow these steps: 1 Start Windows NT. 2 Click the Start button on the Windows NT task bar, and then point to Settings. 3 Click the Control Panel. 4 Double-click the SCSI Adapters icon. 5 Click the Drivers tab, and then click the Add button. 6 In the Install Driver window, click the Have Disk button. 7 Insert the Adaptec Array1000CA Family Manager Set drivers diskette into drive A; enter the following path to the installation files and then click OK. a:\winnt The Adaptec Array1000CA Family Adapter is highlighted by default. 8 In the Install Driver window, Click OK. 9 Click the New button when asked if you want to use the cur- rently installed driver(s) or install new one(s). 10 Type a:\winnt again, and click Continue. The driver is now installed. 4-6