Adaptec 1420SA User Guide - Page 29
Installing the NetWare Driver in a New NetWare System, Enter, Storage adapters, Delete, Insert - loading configuration
![]() |
UPC - 760884150542
View all Adaptec 1420SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing the Driver Installing the NetWare Driver in a New NetWare System Note: For information about installing drivers if you use the NetWare CD to install your operating system, see your Novell documentation. To install the driver in a new Novell NetWare 6.5 system: 1 Install and configure the controller and hard drives as described in Installing the Controller on page 2-2. 2 Use the instructions provided in the NetWare manual to begin the installation. 3 When the No storage device was detected in this system. Load the appropriate driver (HAM) prompt appears, press Enter, then Esc. 4 On the Device Type screen, select Storage adapters, then press Enter. 5 If the list contains the HostRAID SATA driver (AAR81XX.HAM), select the driver, then press the Delete key to delete it. 6 Press the Insert key twice to Add an unlisted driver. 7 Insert the support disk for Novell NetWare. 8 Press F3 to specify a path, then type a:\ (where a is the diskette drive letter), then press Enter. Note: The driver and support files will be copied to the system volume: AAR81XX.HAM. 9 Verify that the driver name displays in the list of device drivers that appears in the window (for example, AAR81XX.HAM) then select Return to Driver Summary, then press Enter. 10 Select Continue, then press Enter. 11 Follow the instructions in the NetWare manual to complete the installation. 3-8
![](/manual_guide/products/adaptec-1420sa-user-guide-cb6123e/29.png)