Adaptec 2060900 User Guide - Page 112

Installing the SCSI Driver for Novell NetWare Installing the Driver When NetWare is Already Installed To update or install the adpu320.ham driver when NetWare is already installed, follow the instructions in this section. The procedures are similar for all versions of NetWare. Procedures that are specific to a NetWare version are noted when necessary. 1 Make a backup copy of the old driver (if it exists) before installing the new driver. 2 Copy the adpu320.ham driver from the Ultra320 FMS driver floppy disk for NetWare into the server's startup directory (for example, c:\nwserver, c:\server.40) on your hard disk. This overwrites any existing version of the driver in the directory. 3 If necessary, modify the load command line in the startup.ncf file so that the proper path to the driver and all appropriate command line options are specified. See Loading the Driver at Server Bootup on page 10-4. The correct syntax to load the Ultra320 driver is: load [pathname]adpu320 [options] Command line options are not case sensitive. Placing spaces between command line options is required. See Loading the Driver at Server Bootup on page 10-4 for possible values. 10-3