Adaptec 2130SLP User Guide - Page 89
Fine-tuning Logical, Drives, If you want to remove a specific disk drive and replace it
![]() |
UPC - 760884150610
View all Adaptec 2130SLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 9: Managing Logical Drives and Hot Spares ● 88 4 Select a new RAID level, then click Next. Only valid options are offered. In the example shown in this section, a RAID 1 logical device is being changed to a RAID 5 logical device. 5 In the Logical Devices panel, select the disk drives you want to use in the modified logical drive. Adaptec Storage Manager prompts you to select the correct number of disk drives, as shown below. Number of disk drives required If you want to remove a specific disk drive and replace it with another one (for instance, replace a smaller disk drive with a larger one), click on the disk drive you want to remove. An X indicates that the selected disk drive will be removed from the logical drive. 6 Modify the Advanced Settings, if required. (See Fine-tuning Logical Drives on page 78.)
![](/manual_guide/products/adaptec-2130slp-user-guide-80fc7e9/89.png)