Adaptec 2930U User Guide - Page 22
Installing Drivers
![]() |
UPC - 760884155530
View all Adaptec 2930U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing SCSI Devices 4 Connect the other end of the cable to a SCSI connector on the back of the SCSI device. 5 If you are installing only one external SCSI device, terminate the device. Refer to your SCSI device's documentation for termination instructions. 6 Connect other external SCSI devices by cabling each device to the previous one, as shown. Only terminate the SCSI device at the end of the chain. Unterminated devices Terminated device 7 Reconnect the power cord to the computer and connect power cables to the external SCSI devices. 8 Turn on the SCSI devices and allow them to power up. Then turn on the computer. 9 Install the driver. See Chapter 4, Installing Drivers for more information. 3-6
![](/manual_guide/products/adaptec-2930u-user-guide-fd38e6b/22.png)
3-6
Installing SCSI Devices
4
Connect the other end of the cable to a SCSI connector on the
back of the SCSI device.
5
If you are installing only one external SCSI device, terminate the
device.
Refer to your SCSI device’s
documentation for termination
instructions.
6
Connect other external SCSI devices by cabling each device to
the previous one, as shown. Only terminate the SCSI device at
the end of the chain.
7
Reconnect the power cord to the computer and connect power
cables to the external SCSI devices.
8
Turn on the SCSI devices and allow them to power up. Then
turn on the computer.
9
Install the driver. See
Chapter 4,
Installing Drivers
for more
information.
Terminated device
Unterminated devices