Adaptec 3400S Installation Guide - Page 10

SCSI RAID Installation Guide About the Documentation The complete documentation set for the Adaptec SCSI RAID product line consists of three parts: I SCSI RAID Installation Guide (this book), which contains information that helps you to configure and install your Adaptec SCSI RAID controller. I Storage Management Software User's Guide which describes how to use the Storage Manager on ROM (SMOR) utility, Adaptec Storage Manager software, and the RAIDUTIL command line utility. I Storage Manager Online Help, which contains information about using the Storage Manager software, using SCSI devices, and creating disk arrays. The Storage Manager online help information contains both topical and pop-up helps for Storage Manager, Adaptec products, and RAID concepts. This Installation Guide contains four chapters and two appendices. I Chapter 1, Introduction - This chapter provides an overview of the rest of the documentation and important notices. I Chapter 2, About Your New Controller - This chapter describes the features of the Adaptec SCSI RAID controllers, and the add-on modules that you can use with your controller. I Chapter 3, Installing Your Controller - This chapter provides instructions about setting up device IDs and termination, assembling the controller modules, using cache memory modules, selecting the proper cables, and installing the controller into your system. I Chapter 4, Installing Adaptec SCSI RAID Software - This chapter provides instructions for installing Adaptec device drivers and Storage Manager for all supported operating systems. After the hardware is configured and the disk arrays created, you can install the operating system, Adaptec SCSI RAID drivers and the full, OS-specific version of Storage Manager. I Appendix A, Product Diagrams - This appendix provides outline drawings of the Adaptec SCSI RAID circuit boards. These drawings assist you in locating the various components on the boards. 1-2