Adaptec 3410S Installation Guide - Page 30
Installing Additional Cache Memory, Seating the Module – Adaptec 3200S/3400S Only
View all Adaptec 3410S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Adaptec RAID Installation Guide Installing Additional Cache Memory Adaptec RAID controllers can be upgraded with additional cache memory. See Cache Memory Module on page 1-12 for additional information about memory modules for cache memory. To install cache memory modules 1 Ground yourself and take appropriate ESD precautions. 2 If necessary, power down your system and remove the RAID adapter. Note: Adaptec 3200S/3210S/3400S/3410S with battery backup module only-Remove the battery backup module before installing or removing cache memory. 3 Proceed to the appropriate section for your controller: I Seating the Module - Adaptec 3200S/3400S Only on page 2-6. I Seating the Module - Adaptec 2400A/2100S/3210S/3410S Only on page 2-7. Seating the Module - Adaptec 3200S/3400S Only Holding the circuit board and module by the edges, slide the module into the socket as shown below. Refer to Appendix A for socket locations. 2-6