Adaptec 39320A-R Installation Guide - Page 5

Setting Up SCSI Devices

Get Adaptec 39320A-R - SCSI Card Storage Controller U320 320 MBps PDF manuals and user guides
UPC - 760884155257
View all Adaptec 39320A-R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Warning: Be careful when inserting the Adaptec SCSI Card 39320A in a PCI slot. Some 32-bit slots will not accommodate it, and the card may break if you force it into the slot. 4 Insert the Adaptec SCSI Card 39320A in the 64-bit (or 32-bit) PCI or PCI-X expansion slot; press down firmly until the card clicks into place, then replace the slot cover screw. When installed properly, the card should appear level with the expansion slot, as shown below. Setting Up SCSI Devices There are several things you may need to do to your SCSI devices before you connect them to the Adaptec SCSI Card 39320A: s Check the SCSI IDs s Set the termination s Connect the power cables Since setup can vary from device to device, always refer to the device's documentation for specific instructions. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
4
Warning:
Be careful when inserting the Adaptec SCSI Card
39320A in a PCI slot. Some 32-bit slots will not
accommodate it, and the card may break if you force it into
the slot.
4
Insert the Adaptec SCSI Card 39320A in the 64-bit (or 32-bit)
PCI or PCI-X expansion slot; press down firmly until the card
clicks into place, then replace the slot cover screw. When
installed properly, the card should appear level with the
expansion slot, as shown below.
Setting Up SCSI Devices
There are several things you may need to do to your SCSI devices
before you connect them to the Adaptec SCSI Card 39320A:
■
Check the SCSI IDs
■
Set the termination
■
Connect the power cables
Since setup can vary from device to device, always refer to the
device’s documentation for specific instructions.