Adaptec 5805Z User Guide - Page 17
Adding a Battery Backup Module, Upgrading the Controller Firmware, Striped Mirror RAID 1E - 5805 firmware
UPC - 760884156186
View all Adaptec 5805Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 3: About Your RAID Controller ● 17 ● Striped Mirror (RAID 1E)-A RAID 1 Enhanced array is similar to a RAID 1 array except that data is both mirrored and striped, and more disk drives can be included. ● Hot Space (RAID 5EE)-A RAID 5EE array is similar to a RAID 5 array except that it includes a distributed spare and must be built from a minimum of four disk drives. ● Dual Drive Failure Protection (RAID 6)-A RAID 6 array is similar to a RAID 5 array except that it includes two independent sets of parity data instead of one. ● Dual Drive Failure Protection (RAID 60)-A RAID 60 array is similar to a RAID 50 array except that it includes four independent sets of parity data instead of two. Adding a Battery Backup Module This table shows the battery model supported by your Adaptec RAID controller. RAID Controller Adaptec RAID 5085/Adaptec RAID 5405/Adaptec RAID 5445/Adaptec RAID 5805/ Adaptec 51245/Adaptec 51645/Adaptec 52445 Battery Model Adaptec Battery Module 800 Adaptec Battery Module 800T To purchase a battery backup module, refer to the Adaptec Web site at www.adaptec.com. Upgrading the Controller Firmware To upgrade the firmware on your Adaptec RAID controller, follow the instructions in Using the Adaptec Flash Utility on page 101. You can also use the Adaptec Storage Manager to upgrade your controller firmware, refer to the Adaptec Storage Manager User's Guide.