Adaptec AHA-2940UW User Guide - Page 25

3 w w w w Using SCSISelect The SCSISelect utility enables you to change host adapter and SCSI configuration settings directly from your computer's desktop. SCSISelect also contains utilities that allow you to low-level format or verify the disk media of your SCSI hard disk drives. You can use SCSISelect directly from the P1275 User Interface. Selecting a Single-Chip Host Adapter with the P1275 User Interface To select a single-chip host adapter with the P1275 User Interface: 1 Enter the system's Forth evaluator. 2 To display a list of attached devices, type the following command at the ok prompt (also known as the Forth prompt, Forth evaluator, or ROM monitor): show-devs 3 From the ok prompt, select the Adaptec single-chip host adapter to be configured. The word select is used to establish a device instance for the adapter. For example, to select a singlechip host adapter, type the following command: select /pci/pci@2/scsi@4 Some systems may allow abbreviated forms of the device path name for selection, for example: select /pci/@2/@4 3-1 Downloaded from www.Manualslib.com manuals search engine