Adaptec APA-358 Installation Guide - Page 4

3 Host Adapter Layout This diagram shows the APA-358 components. 4 Default Settings The MiniSCSi EPP operates correctly with its factory default settings in most PCs. The default settings are Parameter Default Setting Host Adapter SCSI ID 7 Host Adapter Termination Port Address Speed Selection Enabled 378h (Options: 278h, 3BCh1) Fastest possible for EPP2 Extended Translation for Drives Over Automatic (Enabled) 1 GByte 1 The 3BCh setting can only be used for bidirectional and unidirectional configurations; it is not applicable for EPP. 2 Use the /M switch to lower the transfer rate as required for certain parallel ports. See The MiniSCSI EPP Does Not Function on page 7 and the Software User Guide for more details on the /M options. 5 Installation Hardware installation involves plugging the MiniSCSI EPP into a parallel printer port and connecting it to the applicable SCSI device(s). Follow the steps carefully in each subsection below to correctly install the MiniSCSI EPP. 3