Airlink APSUSB201 Quick installation guide - Page 2
Setup Preparation - manual
View all Airlink APSUSB201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Section 1 Setup Preparation Warning: Before beginning the installation, make sure that the printer driver is installed locally on each computer that will print through the print server. Otherwise, the print server will not be configured successfully. Please refer to your printer's manual for instructions on how to install the printer driver. Before setting up the print server, please take note of your TCP/IP setting. Step 1 Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK. Step 2 At the command prompt, type ipconfig and press Enter. Step 3 Write down the information for the IP Address, Subnet Mask, and Default Gateway. You will need these information later. (This is the IP Address of your computer).