Airlink AR315W Manual - Page 77
Data - Options Screen - router firmware
View all Airlink AR315W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Advanced Administration Options This screen allows advanced users to enter or change a number of settings. For normal operation, there is no need to use this screen or change any settings. An example Options screen is shown below. Data - Options Screen Backup DNS IP Address TFTP Enable Firmware Upgrade using TFTP UPnP Enable UPnP Services Allow Configuration... Enter the IP Address of the Backup DNS (Domain Name Servers) here. These DNS will be used only if the primary DNS is unavailable. • If enabled, TFTP (Trivial FTP) can be used to upgrade the firmware in this device. This is normally not required. • UPnP (Universal Plug and Play) allows automatic discovery and configuration of equipment attached to your LAN. UPnP is supported by Windows ME, XP, or later. • If Enabled, this device will be visible via UPnP. • If Disabled, this device will not be visible via UPnP. • If checked, then UPnP users can change the configuration. • If Disabled, UPnP users can only view the configuration. But currently, this restriction only applies to users running Windows XP, who access the Properties via UPnP. (e.g. Right - click the Wireless Router in My Network Places, and select Properties) 73