Airlink ARW027 Quick installation guide - Page 4

Technical Support

Page 4 highlights

The MTU specifies the largest packet size permitted for network transmission. Enter the value desired. For most DSL users, it is recommended to use the default value of 1492. The Maximum Idle Time determines the maximum idle time allowed before a connection is dropped (default time=0, always connected). Connect-on-demand allows you to make a connection automatically when there is a need for connection. Click Next to go to the next page and skip to Step 8. Step 8 If your ISP provided at least one DNS Server IP Address, type that IP Address in the Primary DNS address field. You can enter another DNS Server IP Address in the Secondary DNS address field. The router will use these addresses for quicker access to the DNS Servers. If your ISP did not provide you with any DNS server address, just leave the fields blank. Click Finish to complete the setup and wait for the System Light on the front panel of the router to start blinking. Step 7d PPTP: If you are using PPTP to connect to the Internet, select this option. Enter the PPTP Account Name, PPTP Password, Host Name, Service IP Address, Your IP Address, and Your Subnet Mask. If your ISP provided you with a Connection ID, enter it in the Connection ID field, otherwise, leave it as zero. The MTU specifies the largest packet size permitted for network transmission. Enter the value desired. For most PPTP users, it is recommended to use the default value of 1460. The Maximum Idle Time determines the maximum idle time allowed before a connection is dropped (default time=0, always connected). Connect-on-demand allows you to make a connection automatically when there is a need for connection. Click Next to go to the next page. Congratulations! You have successfully configured your Wireless Router. For more detailed information on advanced setups, please refer to the User's Manual. Section 4 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlinkplus.com P/N: 1907WLB22037051

  • 1
  • 2
  • 3
  • 4

The
MTU
specifies the largest packet size permitted for network transmission. Enter
the value desired. For most DSL users, it is recommended to use the default value of
1492
.
The
Maximum Idle Time
determines the maximum idle time allowed before a
connection is dropped (default time=0, always connected).
Connect-on-demand
allows you to make a connection automatically when there is a need for connection.
Click
Next
to go to the next page and skip to
Step 8
.
Step 7d
PPTP:
If you are using PPTP to connect to the Internet, select this option. Enter the
PPTP
Account Name
,
PPTP Password
,
Host Name
,
Service IP Address
,
Your IP
Address
, and
Your Subnet Mask
. If your ISP provided you with a Connection ID,
enter it in the
Connection ID
field, otherwise, leave it as zero.
The
MTU
specifies the largest packet size permitted for network transmission. Enter
the value desired. For most PPTP users, it is recommended to use the default value of
1460
.
The
Maximum Idle Time
determines the maximum idle time allowed before a
connection is dropped (default time=0, always connected).
Connect-on-demand
allows you to make a connection automatically when there is a need for connection.
Click
Next
to go to the next page.
Step 8
If your ISP provided at least one DNS Server IP Address, type that IP Address
in the
Primary DNS address
field. You can enter another DNS Server IP Address in
the
Secondary DNS address
field. The router will use these addresses for quicker
access to the DNS Servers. If your ISP did not provide you with any DNS server
address, just leave the fields blank. Click
Finish
to complete the setup and wait for
the
System Light
on the front panel of the router to start blinking.
Congratulations! You have successfully configured your
Wireless Router. For more detailed information on
advanced setups, please refer to the User’s Manual.
Section 4
Technical Support
Toll Free: 1-888-746-3238
Web Site: www.airlinkplus.com
P/N: 1907WLB22037051