Airlink ASOHO4P Quick installation guide - Page 23

Login to the Internet Broadband Router

Get Airlink ASOHO4P PDF manuals and user guides View all Airlink ASOHO4P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

INTERNET BROADBAND ROUTER CONFIGURATION First make sure that the network connections are functioning normally. This Internet Broadband Router can be configured using Internet Explorer 4.0 or newer web browser versions. Login to the Internet Broadband Router Before you configure this device, note that when the Broadband Router is configured through an Ethernet connection, make sure the host PC has an IP address leased from the router. For example, when the LAN interface IP address of the Router is 192.168.1.1 by default, the host PC's IP address should be set as 192.168.1.x (where x is a number between 2 and 254), and the subnet mask is 255.255.255.0. 1. Open Internet Explorer 4.0 or above Internet browser. 2. Enter IP address http://192.168.1.1 (the factory-default IP address setting) to the URL web address location. 3. When the following dialog box appears, remain blank (first login) or enter the password and press Login to enter the main configuration window. Note: If needed to set a password, then refer to the Administrator Setting. 4. After entering the password, the main web page comes up, there are two choices for setting, Quick Setup or Advanced Setup, it is 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
17
INTERNET BROADBAND ROUTER CONFIGURATION
First make sure that the network connections are functioning normally.
This Internet Broadband Router can be configured using Internet
Explorer 4.0 or newer web browser versions.
Login to the Internet Broadband Router
Before you configure this device, note that when the Broadband
Router is configured through an Ethernet connection, make sure the
host PC has an IP address leased from the router. For example, when
the LAN interface IP address of the Router is 192.168.1.1 by default,
the host PC’s IP address should be set as 192.168.1.x (where x is a
number between 2 and 254), and the subnet mask is 255.255.255.0.
1.
Open Internet Explorer 4.0 or above Internet browser.
2.
Enter IP address
(the factory-default IP
address setting) to the URL web address location.
3.
When the following dialog box appears, remain blank (first login)
or enter the password and press Login to enter the main
configuration window.
Note: If needed to set a password, then refer to the
Administrator Setting
.
4.
After entering the password, the main web page comes up, there
are two choices for setting, Quick Setup or Advanced Setup, it is