Airlink ASOHORL Quick installation guide - Page 8
Trouble-shooting - nic driver
 |
View all Airlink ASOHORL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
44 Trouble-shooting If you experience any problems with the adapter, first make sure the appropriate driver is loaded, the proper cable is connected to the adapter port and the hub complies with the adapter specification, such as 10Mbps 10BaseT or 100Mbps 100BaseTX, then check the LED. The adapter provides one LEDs to indicate network status. „ Lnk/Act A green LED indicates if the NIC has been LINK ok or not. When the light is OFF, it indicates that the UTP port has not been connected or LINK not ok. When the light is ON, it indicates that the UTP port LINK ok. When the light is BLINKING, it indicates that there is traffic flow on the network which the adapter is connected to. 6
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9
 |
 |
4
Trouble-shooting
If you experience any problems with the adapter, first
make sure the appropriate driver is loaded, the proper
cable is connected to the adapter port and the hub
complies with the adapter specification, such as
10Mbps 10BaseT or 100Mbps 100BaseTX, then check
the LED.
The adapter provides one LEDs to indicate network
status.
Lnk/Act
A green LED indicates if the NIC has been LINK ok or
not.
When the light is OFF, it indicates that the UTP
port has not been connected or LINK not ok.
When the
light is ON, it indicates that the UTP port LINK ok.
When the light is BLINKING, it indicates that there is
traffic flow on the network which the adapter is
connected to.
6