Airlink ASW308V2 Quick Installation Guide - Page 2

Section 3 Hardware Installation • Place the Switch on a smooth surface • Connect the output of power cord to the power port of the Switch • Connect your network device (Switch, Router, or PC) to one port of the Switch using Category 5 or 6 UTP/STP cabling • Connect another network device to another port of the Switch Note: The cable distance between the Switch and a network device should not exceed 100 meter. To reliably operate your network at 100Mbps, you must use an Unshielded/Shielded Twisted-Pair (UTP/STP) Category 5 cable, or better Data Grade cabling. While a Category 3 or 4 cable may initially seem to work, it will soon cause data loss. All kinds of IEEE802.3 compatible network device can connect to the Switch by using straight-through wires or crossover wires because of Switch's auto MDIX function. Section 4 Specifications Standard • IEEE802.3 10Base-T Ethernet • IEEE802.3u 100Base-TX Fast Ethernet Network Media • 100Base-TX - UTP/STP category 5 cable • 10Base-T - UTP/STP category 3 or 5 cable Connectors • 8 RJ-45 ports for 10/100Mbps TX Forwarding Method • Store and Forward MAC Address Table • 1K Buffer Memory Size • 768K bits Access Method • CSMA/CD LED indicators • Power (per unit) • Link/Activity (per port) Dimension • 131mm(L) x 71mm(W) x 28mm(H) Temperature • Operating: 0° ~ 50°, Storage : - 20° ~ 70° Humidity • Operating: 10% ~ 90% RH, Storage: 5% to 90% RH Power • Input: 100-240V AC, 50~60Hz • Output: DC 9V / 700mA Certifications • FCC, CE Warranty • 1-Year Limited Warranty Section 5 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Website: www.airlink101.com *Actual throughput will vary. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners. Photos of product may not reflect actual content. Copyright ©2014 Airlink101®