Alesis SR18 Quick Start Guide - Page 7
Tempo Led, Rec Led, A & B, Erase, Save / Copy, Navigation Buttons, Inc / Dec, Value Dial - patterns
View all Alesis SR18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6. TEMPO LED - This LED will blink at a rate equal to the tempo displayed on the screen's bottom right corner. 7. REC LED - This LED will light when the SR18 is recording. It will blink when you are required to confirm or cancel an action. 8. A & B - Each Pattern consists of two Main sub-patterns - A & B. You can select each of the two sub-patterns by pressing its corresponding button. These sub-patterns allow you to program variation in your Patterns (i.e. sub-pattern A is the verse, sub-pattern B is the chorus). 9. FILL - Each Pattern also includes two Fills associated with each of the two sub-patterns. The Fills are used to transition from one sub-pattern to another (i.e. transition from verse to chorus). 10. ERASE - This button allows you to erase Patterns or Songs. Hold this button down and the screen will prompt you to verify that you want to erase the selected element. To erase the part, press the REC button while the ERASE button is being held down. In addition, ERASE allows you to erase specific events in real-time as you compose your patterns. Simply hold down the ERASE button as the Pattern plays and press the pad corresponding to the sound you wish to erase. Any events assigned to the pad will be erased from the moment the pad is pressed until either the pad or the ERASE button is released. 11. SAVE / COPY - This button allows you to save, copy or append the selected Pattern or Song to a specific location, in addition to various other save / copy functions. The different functions can be accessed by pressing the PAGE UP button while holding down SAVE / COPY. SAVE COPY APPEND PATTERN Saves the selected Pattern, along with all subpatterns, to a specific location, overwriting any data which may already exist. 1. Press and hold SAVE / COPY. 2. Select the destination with the DATA dial or INC / DEC buttons. 3. Press REC to save. Copies only the selected sub-pattern to the destination's sub-pattern. 1. Press and hold the SAVE / COPY button. 2. Press PAGE RIGHT 3. Select the destination Pattern with the DATA dial or INC / DEC buttons. 4. Press A, B or FILL to select the destination sub-pattern. 5. Press REC to copy. Appends the current Pattern and all its subpatterns to a selected Pattern. Note that Patterns can only be appended to Patterns of the same time signature. 1. Press and hold the SAVE / COPY button. 2. Press PAGE RIGHT twice. 3. Select the destination with the DATA dial. 4. Press REC to append. SONG Saves the selected Song to memory, overwriting any data which may exist. 1. Press and hold SAVE / COPY. 2. Select the destination with the DATA dial or INC / DEC buttons. 3. Press REC to save. Appends the current Song to another Song. Note that the combined Song length cannot exceed more than 254 steps. 1. Press and hold the SAVE / COPY button. 2. Press PAGE RIGHT. 3. Select the destination with the DATA dial. 4. Press REC to append. 12. MUTE - This button allows you to mute a selected instrument layer. Hold down the button and press DRUM, PERC or BASS to mute the corresponding instrument layer. To un-mute the layer, press the corresponding button again while MUTE is being held down. NAVIGATION BUTTONS: 13. INC / DEC - These buttons are used to increment and decrement through values and settings on the SR18. 14. VALUE DIAL - This dial can also be used to increment and decrement values and settings. 15. NUMBER BUTTONS - Alternatively, you may use the number buttons to input values. 16. PAGE UP / DOWN - These two buttons are used to go between pages of options when browsing menus and settings. 4