Alpine 17PRO Owner's Manual - Page 5

Crossover Setup Basic Procedure Step 1: Refer to the speaker configurations shown on pages 5-8 for the most common speaker locations. Step 2: Pick the speaker location type (e.g. Type A, Type B, etc.) that best matches your system. Step 3: Install the recommended Phase Link Module in each network. Step 4: Adjust the tweeter level for each network. NOTE: Tweeter level adjustment may be required for: 1. Proper level matching based upon listener position 2. Satisfying the tastes of the listener. Refer to the Advanced Settings Matrix (page 10) for recommendations. The use of different Phase Link Modules for left/right channels is intended to optimize imaging for the primary listening position. If equal performance is desired for all seats, use the near side measurement as reference for both networks. Speaker LPoocinattsiotnosObserve for Safe Usage Type A or or or INSTALL MODULE 2 INSTALL MODULE 2 A Driver side network B A B Passenger side network NOTE: T W LEVEL adjustment may be desired. See Advanced Settings Matrix for recommendations (Page 10). -EN