Alpine 9843 Owners Manual - Page 22

Installation 1 No Pressure Here Mounting Sleeve (Included) Dashboard No Pressure Here 3 Slide the CDE-9845/CDE-9843/CDE-9841 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel. Removal 1 Remove the DETACHABLE FRONT PANEL. 2 Insert the optional brackets into the back, along the guides on either side of the unit. The unit can now be removed from the mounting sleeve. This unit CDE-9845/CDE-9843/CDE-9841 Remove the Detachable Front Panel (refer to page 5). Slide mounting sleeve from main unit. (see "Removal" on this page). Slide the mounting sleeve into the dashboard. • Please examine the installation. Make certain that no external pressure is applied to either the top of the unit or the removable nosepiece. 2 Screw Hex Nut (M5) ** Bolt Stud Bracket (included) 3 Pull the unit out, keeping it unlocked as you do so. Face Plate Metal Mounting Strap * Ground Lead CDE-9845/CDE-9843/ CDE-9841 Chassis Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicle's chassis. • For the screw marked **, use an appropriate screw for the chosen mounting location. Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDE-9845/CDE9843/CDE-9841. Connect all other leads of the CDE9845/CDE-9843/CDE-9841 according to details described in the CONNECTlONS section. CDE-9845/ CDE-9843/ CDE-9841 Ground Lead * Screws (M5 × 8) (Included) Mounting Bracket • Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicle's chassis. 21-EN